Coating the Edges with Epoxy

Our PrimaLoc epoxy is formulated so that you can pour it right over the edge of a surface without having a border or a raised edge all the way around.

You will simply put down some 2mil painters plastic so that you don’t get epoxy on your floor. The epoxy will self-level on the surface of the bar and drip over the edges coating the sides. You will want to pour it deliberately so that the sides get coated really good. After the epoxy hardens, you can come back and sand underneath any hardened epoxy that has formed. The epoxy will not hang down like icicles as it will go over the edges and under the lip about 1/4” to 1/2”.