Maintaining 75 Degrees

It is extremely critical that the product be used in room conditions above 75° F.
 When the room temperature is below 75° F. the heat from the curing epoxy is trapped inside resulting in a completely cloudy surface. Use space heaters if necessary to sustain the temperature during the product curing stage (72 hours). 
*Please note that this is not a recommendation, it is a requirement and there is no room for variance. Some thermostats may not be 100% accurate so it is best to set the temperature to a few degrees warmer to ensure the 75° F. is met. 

If your working in a large area that is hard to keep above 75 degrees, you can build a small tent enclosure out of painters plastic, pvc, and duct tape. Then you can place a small space heater inside to ensure the temperature is above 75 degrees. 

Still need help? Contact Us Contact Us